Laser Cut
Your design ideas are created on cardboard, PMMA and wood. If you wish to present a cardboard box prototype, a design product, a unique business card for special events, from now on you can have them fast : the laser cut plotter with millimeter accuracy.
Please check our materials library.
Laser Engraving
Laser engraving creates extraordinary effects on various materials. You can start with a simple writing or you can have an articolated illustration.
A special business card, a new graphic design for packaging, a decorated glass sheet
Please check our materials library.
Bending with Laser
Working with lower power, acrylic materials like Plexiglass can be bended with our CO2 Laser plotter.
Please check our materials library.
Materials
Light brown color in single layer.
This material is made of recycled paper and has a natural matte finish. It may contain color imperfections.
Cardboard is typically used for packaging, box prototyping etc etc and it's 100% recyclable.
Avaible in other colors
Thickness : max 5 mm
Brown color in single or double layer with visible corrugations.
It is great for creating structures and it provides good performance with structural loads.
It's made with recycled paper and it's 100% recyclable.
Corrugated cardboard is used for packaging, box prototyping, Google VR glasses etc etc
Thickness : 1.5 to 15 mm
Acrylic (or PMMA) is a plastic material avaible in a wide range of colors including transparent tints. It is also avaible with matte finish. Acrylic is very sensitive to stress concentrations and sharing certain fragility with glass.
Engraving details shouldn't be lower than 1 mm.
Acrylic is known with other commercial names such as Plexiglass, Perspex, Lucite, etc.
Creating structures with acrylic could be complicated because of thickness variations in sheets.
Acrylic is often used in jewelry, conference badges, tableware, electronic boxes, signage etc etc.
Thickness: 1 to 10 mm.
Various types of metal could be engraved, here's a list : copper, brass, aluminium, stainless steeel.
Copper and brass are used in jewelry, insignia, furnishings accessories and details, mechanical parts. Copper is 100% recyclable while it's just possible to recycle the copper parts in brass material.
It's not possibile to cut metals with laser
Wooden fiber materials can be cut and engraved without any problems.
Many woods are usable : plywood, MDF, veneered, cork, bamboo, fir, pine, beech and many more.
Alert: wood is a completely natural material and suffers thermal reactions, umidity etc. It is really hard to have a clean and flat sheet during laser processing.
We recommend to work with relatively small areas to avoid folds and other imperfections.
Wooden materials are used in jewelry, furnishings, electronic boxes, boxes, badges, insignia, publishings, display...
Thickness : max 8 mm
